Frigidaire Air Conditioners
& Heat Pumps
Split Systems
Delivering peace of mind unit after unit.
Every unit is tripled checked at each manufacturing stage. This is an average of 144 quality checks as your unit was built. In addition, all electrical and mechanical components are 100% fired and tested on the manufacturing line. You are assured the highest quality air conditioner or heat pump is being delivered to your home.
Extending the life of your unit.
High quality does not just happen. It must be engineered from the start. All air conditioners and heat pumps are designed for maximum com pressor performance. All 13 SEER and higher products include a 10-year compressor warranty for extended protection.
Total comfort never felt so good or sounded so quiet.
Great airflow and quiet performance are part of the Frigidaire comfort equation. A precision work of art that delivers season after season.
Aesthetically pleasing and designed for easy care.
Smooth and practical lines make your Frigidaire air conditioner or heat pump eye appealing. All outdoor units are finished with a silicone-protective polyurethane finish that under goes a 950 hour salt spray test. It protects your unit from erosion 50% more than standard outdoor finishes.
Built to last.
From long-lasting motor to the one-piece orifice your unit will provide years of trouble-free and reliable service. *Call us today for your free, no obligation, in home estimate. We are your Calgary air conditioning experts.
Best Air Conditioners &Heat Pumps
15/16 SEER - Outdoor Section
What does having a 15/16 SEER
Air Conditioner or Heat Pump mean?
Your air conditioner or heat pump’s efficiency is measured by a Seasonal Energy EfficiencyRating (SEER). The higher the SEER rating the more efficiently your unit operates.Increased efficiency translates into savings in utility costs.
|
Annual savings based on 36,000 BTU unit, 1500 cooling load hours, and .08/kwh. Actual savings may vary depending on climate conditions, energy rates and patterns of usage. |
|
 |
The Frigidaire 15/16 SEER Two Stage Cooling air conditioners and heat pumps feature the latest environmentally-friendly, refrigerant technology, R-410A.
Your Frigidaire air conditioner or heat pump has been carefully designed and engineered to give you outstanding energy efficiency and years of trouble-free operation. No detail has been left out. Frigidaire uses only proven components like the Ultra-tech Copeland® scroll compressor. It’s the leaders choice for efficiency, durability, and longevity. Just another “value added” manufacturing step built into all Frigidaire products. |
What are the benefits of two stage; variable speed cooling?
-
Two stage cooling products maintain a more consistent comfort level throughout your home.
-
During the first stage, which is about 80% of the time, the unit will use about 68% of its cooling capacity.
-
It will always start in the first stage and attempt to meet the cooling demand.
-
Reduced capacity.
-
When the temperature rises the air conditioner or heat pump automatically adjusts itself and enter the second stage to meet the increased cooling demand.
-
A two stage, variable-speed unit runs for longer cycles and will remove up to six times more moisture than a conventional unit.
-
The result is a more comfortable environment even at a higher thermostat setting.
Thanks to two stage technology the temperature in your home will only vary a couple of degrees and you will experience quiet comfort.
-
The unique variable speed motor decreases fan noise.
-
Since the fan operates slower during the low stage cooling demand it produces less noise.
-
The variable speed also allows the motor to ramp up to speed slowly eliminating uncomfortable temperature swings.
-
Efficient operation is what two stage, variable speed cooling, is all about.
-
Since your unit runs at the stage needed based off demand, you never pay for energy that is not needed.
-
The indoor section, a coil or air handler, completes your new air conditioner or heat pump system. With this system, a indoor coil section with a variable speed gas furnace is required if you have gas heat. If you have a heat pump, then the matched variable air handler section is required to complete the system. |
|
| |
|
Product Features
